Hangzhou Powersonic Equipment Co., Ltd.

We are not only sale ultrasonic, but more research and learn ultrasonic.

we are not for selling ultrasonic equipment, but more for sloving your problem

 

Home ProductsUltrasonic Welding Transducer

55khz High Amplitude Ultrasonic Welding Transducer For Surgical Ultrasonic Bone Cutting

55khz High Amplitude Ultrasonic Welding Transducer For Surgical Ultrasonic Bone Cutting

  • 55khz High Amplitude Ultrasonic Welding Transducer For Surgical Ultrasonic Bone Cutting
  • 55khz High Amplitude Ultrasonic Welding Transducer For Surgical Ultrasonic Bone Cutting
55khz High Amplitude Ultrasonic Welding Transducer For Surgical Ultrasonic Bone Cutting
Product Details:
Place of Origin: China
Brand Name: RPS-SONIC
Certification: CE
Model Number: RPS-T5020-4D
Payment & Shipping Terms:
Minimum Order Quantity: 5 sets
Price: negotiation
Packaging Details: Foam+Carton
Delivery Time: 2days
Payment Terms: T/T, Western Union, MoneyGram
Supply Ability: 200 Sets/month
Contact Now
Detailed Product Description
Frequency: 50 KHz Ultrasonic Converter Diameter: 16mm
Ceramic Chips: 4chips Power: 80W
Capacity: 3000~3400 Application: Ultrasonic Bone Cutting Device
Amplitude: 12um
High Light:

ultrasonic power transducer

,

ultrasonic piezo transducer

 

high amplitude Ultrasonic transducer for SURGICAL ULTRASONIC BONE CUTTING 55Khz

 

 

Ultrasonic cutting devices have been applied in the surgery field as an alternative to conventional methods. These devices, powered by piezoelectric transducer, allow for precision bone cutting, at ultrasonic frequencies, with little damage to soft and neurovascular tissues. The project consists of the design and manufacturing of an ultrasonic bone cutting device including the development of novel analytical and multiphysics methodologies for its optimization.
ULTRASONIC BONE CUTTING DEVICE have high requirements on ultrasonic transducer, the transducer have to be small, but powerful, light but in high amplitude. This 55Khz ultrasonic transducer was designed for ultrasonic bone cutting, with diameter 16mm only, very convenient for Scalpel application.

 

 

 

 

Naming method:

For example: RPS-T5020-4D

 

T - Transducer

50 - The outside diameter for piezoceramic ring (mm)

20 - The frequency of the transducer

4 - The number for piezoceramic ring,

D - The type of transducer D means Chinese type,B-Branson type,Z-NTK type.

 

Transducer papameter:

Power
(W)
Frequency
(khz)
Capacitor Range(pF)
Yellow ceramic Gray ceramic Black ceramic
 80W 54.5~56.00 -- 3000~3400 -


 

 

 

Description:

 

The transducer converts high-frequency electrical energy into high-frequency mechanical vibrations. And it contains several piezoelectric ceramic discs sandwiched under pressure between two metal blocks. Between each disc is a thin metal plate, which forms the electrode. When a sinusoidal electrical signal is fed to the transducer via the electrodes, the discs expand and contract, producing axial vibrations.

Transducer requirements will depend on the application. Many requirements will conflict with one another and will be given different priorities. Hence, no single set of guidelines can encompass all requirements — i.e., there are many different ways to achieve the same objectives.

Analytically, transducer performance can only be predicted in a general way. This is because the properties of piezoelectric ceramics are often highly dependent on the operating conditions including temperature, electrical field strength, static compressive prestress, dynamic stress, number of load cycles, and time. These operating conditions can interact with each other and the effects of these conditions are often nonlinear. Also, many properties of piezoelectric ceramics are orthotropic and can vary among the individual ceramics and also between ceramic lots. Further, the interactions at the various component interfaces (e.g., at threads) may be difficult to characterize and the coefficient of convective heat transfer for air cooling may only be approximately estimated. Hence, much of the design process involves experimental testing.

The transducer converts high-frequency electrical energy into high-frequency mechanical vibrations. And it contains several piezoelectric ceramic discs sandwiched under pressure between two metal blocks. Between each disc is a thin metal plate, which forms the electrode. When a sinusoidal electrical signal is fed to the transducer via the electrodes, the discs expand and contract, producing axial vibrations.

15Khz transducer widely used in high power welding&sealing system.Piezoelectric transducer is the electric charge that accumulates in certain solid materials in response to applied mechanical stress. It is key point of all ultrasonic equipment.The transducer decide the property of the machine.We can supply transducer, also transducer with house and booster.

 

 

New design:

  • Transducer horn integrated design
  • small in dimesion,diamteter 16mm 
  • Lightweight aluminum manufacted
  • high amplitude

 

 

 

 

 
 
55khz High Amplitude Ultrasonic Welding Transducer For Surgical Ultrasonic Bone Cutting 0


 
 
 
 
 

Contact Details
Hangzhou Powersonic Equipment Co., Ltd.

Contact Person: admin

Tel: +8615658151051

Send your inquiry directly to us (0 / 3000)

Other Products