Poluda IgorRPS-SONIC is very professional and the sales industry is very patient. I think my air filter has got a perfect cutting plan here.
MikeUltrasonic processing is amazing, greatly improving the quality of our company's finishing
Nguyễn Côngthe machine worked for 5years, still in good performance， Made in China is good quality now, RPS-SONIC is good quality.
30khz Aluminum Housing Ultrasonic Cutting Equipment For Carbon Fiber
|Material||Aluminum/Titanium||Application||Apply To Lace Clothing, Ribbon,trim,filter,decoration Products|
30khz Ultrasonic Cutting Equipment,
aluminum housing ultrasonic cutting equipment,
30khz ultrasonic carbon fiber cutter
30Khz Ultrasonic Cutting Machine With Aluminum Housing For Carbon Fiber
Ultrasonic cutting knives are a type of equipment that uses wave energy for cutting. Its biggest feature is that cutting does not use cutting edges. Or, instead of the cutting edge in the traditional sense. Conventional cutting uses a sharp-edged tool to press against the material being cut. This pressure is concentrated at the cutting edge, and the pressure is very large, exceeding the shear strength of the material being cut. The molecular combination of the material is pulled apart and cut. Since the material is pulled hard by the strong pressure, the cutting edge of the cutting tool should be very sharp, and the material itself must withstand relatively high pressure. It is not good for soft and elastic materials, and it is more difficult for viscous materials.
Ultrasonic cutting also has a great advantage in that it has a fusion at the cutting point while cutting. The cutting site is perfectly sealed to prevent loose tissue (such as textile material flash).
|Generator||Digital generator, 452 x 180 x 100mm|
|Size of cutter||Blade replaceable|
|Length of cable||3M|
|Voltage||220V / 110V|
|Accessory||Foot switch 1pc；Cut blade 2pcs；
1.5mm special hex wrench 1pc；Screw M3×4L 2pcs
|Material of blade||Titanium alloy, stainless steel|
The principle of an ultrasonic cutter is completely different from that of a conventional one. It uses the energy of ultrasonic waves to melt the local heating of the material to be cut, so as to achieve the purpose of cutting the material. Therefore, the ultrasonic cutting does not require a sharp cutting edge, nor does it require a large pressure, and does not cause chipping or breakage of the material to be cut. At the same time, since the cutting blade is subjected to ultrasonic vibration, the frictional resistance is particularly small, and the material to be cut is not easily adhered to the blade. This is particularly effective for cutting viscous and elastic materials, frozen materials such as food, rubber, etc., or objects that are inconvenient to apply pressure.
Ultrasonic cutting machine is suitable for: raw rubber cutting, pipe cutting, frozen meat, candy, chocolate cutting, printed circuit board, industrial, jewelry, plastic products processing, food processing, printing industry, automotive industry. Natural fiber segmentation (divided into fine lines), synthetic fiber deep digging (multilayer circuit cutting), plastic casing processing, thin synthetic resin lacquer (suitable for large areas) All types of paper and base film origin (China) or handheld Cutting machine and so on. The use of ultrasonic cutting machines can also be extended, such as digging holes, shovel digging, scraping paint, engraving, slitting and so on.
The following table presents the company tests for different material thickness, the recommended cutting speed data.
|Cutting Material||Thickness||Cutting speed|
|Asian gram force||2mm||3mm/s|
|Chloroprene rubber||5mm||Easy to cut|
|Corrugated paper||8mm||Easy to cut|
|Plywood||2.5mm||Easy to cut|
|Glass fiber resin||1.5mm||Easy to cut|
|Thick cardboard||1.5mm||Easy to cut|
|Linen||2mm||Easy to cut|
|Urethane||3mm||Easy to cut|
|Nylon/PP||3mm||Easy to cut|
1. Can it be installed on my present lines?
Yes, ultrasonic cutting and processing equipment can be installed easily. RPS-sonic equipment can be as simple as removing the conventional knife and replacing it with a plate to which the ultrasonic knives are attached. Another option is replacing the existing cutting/slitting station with a gantry system that straddles the conveyor you now have.
2. Is the equipment reliable?
RPS-sonic Ultrasonics technology has been continuously improved over our 10 years in the business. All equipment and tooling designs undergo many months of reliability testing before being approved for applications.
3. What materials can/cannot be cut by ultrasonic cutters?
Materials that can be cut by ultrasonic cutters are thermoplastic resins, plastics, rubber, cloths, paper, corrugated cardboard, foamed materials, and foods. Sections obtained by ultrasonic cutters are much smoother than those obtained by ordinary cutters. Cutting with less workload can be realized.
Why choose us?
1.Oversea Service Team: We now have agents in India,Austrillia,Hongkong,Singapore,Taiwan,Malaysia,Germany,and other country still being discussing.
2.Innovation: RPS-sonic and marketing staffs to constantly explore new applications in the field of ultrasound, and the importance of team spirit of cooperation.
3.Half the Price, Double the value: Every product reach you have been test in our company three times,and with 72 hours continous working,to confirm it is well before you get it.
4.Good Components: Ceramic mainly importes from German,and using the superior quality aluminum,titanium raw materials.
5.Individual Customize: We can customize products according to your requirements.Also supply OEM service.
6.Free Test: We accept samples from customers,do free test for customer. Also welcome customer visit our company for experiment.
Shipping and payment:
Shipping: DHL,TNT,FEDEX,UPS Express etc.
Payment: Pay by T/T,Paypal,West Union, customers can choose which payments ways that you accept.