Earloop Mask Titanium Alloy 35 Khz Ultrasonic Welding Equipment

                         28 / 35 Khz Portable Ultrasonic Spot Welding Machine for Polyester Welding

What’s the principle of Ultrasonic plastic welding?

When ultrasonic act on the thermoplastic plastic contact surface, high-frequency vibrations of tens of thousands of times per second. This high-frequency vibration reaches a certain amplitude, and the ultrasonic energy is transmitted to the weld zone through the upper weldment, because the weld zone have a large acoustic resistance, so local high temperatures are generated. Moreover, due to the poor thermal conductivity of the plastic, it can not be dissipated in time and gather in the weld zone, so that the contact faces of the two plastics melt rapidly, and after a certain pressure, they are integrated into one. When the ultrasonic wave stops, let the pressure last for a few seconds to solidify it, thus forming a strong molecular chain for welding purposes, the welding strength can be close to the strength of the raw material. The quality of ultrasonic plastic welding depends on the amplitude of the transducer welding head, the applied pressure and the welding time. The welding time and the welding head pressure can be adjusted. The amplitude is determined by the transducer and the horn. These three quantities have a suitable value for each other. When the energy exceeds the appropriate value, the melting amount of the plastic is large, and the welding material is easily deformed; if the energy is small, the welding is difficult, and the applied pressure cannot be increased. This optimum pressure is the product of the length of the side of the welded portion and the optimum pressure per 1 mm of the edge. Ultrasonic welding is a high-tech technology for welding thermoplastic technology. Various thermoplastic rubber parts can be processed by ultrasonic welding without adding solvent, adhesive or other auxiliary products. The advantage is to increase productivity and reduce cost. improve product quality.

Ultrasonic plastic welding principle: The generator generates 20KHZ, (or 15KHZ) high-voltage, high-frequency signal, through the conversion system, converts the signal into high-frequency mechanical vibration, which is applied to the workpiece of plastic products, through the working surface and the intrinsic intermolecular The friction causes the temperature to be transmitted to the interface to rise. When the temperature reaches the melting point of the workpiece itself, the workpiece welding port is rapidly melted, and then filled in the gap between the interfaces. When the vibration stops, the workpiece is simultaneously cooled and fixed under a certain pressure. , to achieve the perfect welding.

Parameter

Application fields:

Widely used in the Automotive Industry, Electronic Industry, Medical Industry, Household Appliances, Woven Apparel, Office Supplies, Packaging Industry, and Toy Industry And So On. Such As Plastic Body Parts, Car Doors, Car Dashboard, Lights, Mirrors, Sun Visor, Interior Parts, Filters, Reflective Material, Reflective Spike, Bumper, Cable, Motorcycle Plastic Filter, Radiator , Tanks, Pallet Plates. Plastic Electronics: Prepaid Water Meters, Communications Equipment, Atheism Phone, Mobile Phone Accessories, Cell Phone Case, Battery Case, Charger, Maintenance Valve Regulated Lead-Acid Batteries, 3-Inch Floppy Disk, U Disk, SD Card, USB Connectors, Toys, Stationery: Folder, Album, Folding Boxes, PP Hollow Board, Pen Loops, Ink Cartridges, Toner Cartridges. Medical Daily: Watches, Kitchen Utensils, Oral Liquid Bottle, Drip Caps, Mobile Phone Accessories, Gold Soft Brush, Daily Necessities, Health Supplies, Children's Products, Air Mattresses, Clothes Hangers, Tool Holder, Coffee Pot, Cover And Civil Speaker Grille Metal Surface.

Consumer products, automotive components, medical devices and most all industries use ultrasonic plastic welding. Metal inserts may be secured in plastic and dissimilar materials can often be bonded with proper tooling design. ToolTex specializes in toepad welding applications and has worked on several automotive applications.

Kindly check the AMPLITUDE REFERENCE GUIDE for ULTRASONIC WELDING (in Microns (um)) table in the next page, you will find suit frequency for your application.