Poluda IgorRPS-SONIC is very professional and the sales industry is very patient. I think my air filter has got a perfect cutting plan here.
MikeUltrasonic processing is amazing, greatly improving the quality of our company's finishing
Nguyễn Côngthe machine worked for 5years, still in good performance， Made in China is good quality now, RPS-SONIC is good quality.
Fiber Handheld 30khz 500w Ultrasonic Cutting Equipment
|Frequency||30khz||Voltage||220V / 110V|
|Length Of Cable||3M||Material Of Blade||Titanium Alloy, Stainless Steel|
|Weight||8KG||Application||Raw Rubber Cutting, Pipe Cutting, Frozen Meat, Candy, Chocolate Cutting|
Ultrasonic Cutting Equipment 30khz,
Ultrasonic Cutting Equipment 500w,
30khz ultrasonic fiber cutting equipment
Handheld ultrasonic cutting machine 30khz 500w for fiber
|Generator||Digital generator, 452 x 180 x 100mm|
|Size of cutter||Blade replaceable|
|Length of cable||3M|
|Voltage||220V / 110V|
|Accessory||Foot switch 1pc；Cut blade 2pcs；
1.5mm special hex wrench 1pc；Screw M3×4L 2pcs
|Material of blade||Titanium alloy, stainless steel|
Ultrasonic cutting machine is a kind of equipment that uses ultrasonic energy for cutting and processing. Its major feature is that it does not require cutting edges. In other words, the cutting edge in the traditional sense is not used. Traditional cutting uses a knife with a sharp edge to press against the material to be cut. This pressure is concentrated at the cutting edge, and the pressure is very large, exceeding the shear strength of the material to be cut, and the molecular bonds of the material are pulled apart and cut. Since the material is pulled apart by strong pressure and rigidity, the cutting edge of the cutting tool should be very sharp, and the material itself has to bear relatively large pressure. The cutting efficiency of soft and elastic materials is not high.
The principle of the ultrasonic cutting machine is completely different. It uses ultrasonic energy to heat and melt the material to be cut locally, so as to achieve the purpose of cutting the material. Therefore, ultrasonic cutting does not require a sharp edge, nor does it require a lot of pressure, and will not cause chipping or damage to the material being cut. At the same time, because the cutting knife is doing ultrasonic vibration, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. This is particularly effective for viscous and elastic materials, frozen materials, such as food, rubber materials, and objects that are inconvenient to apply pressure.
Ultrasonic cutting machine is suitable for: raw rubber cutting, pipe cutting, frozen meat, candy, chocolate cutting, printed circuit board, industrial, jewelry, plastic products processing, food processing, printing industry, automotive industry. Natural fiber segmentation (divided into fine lines), synthetic fiber deep digging (multilayer circuit cutting), plastic casing processing, thin synthetic resin lacquer (suitable for large areas) All types of paper and base film origin (China) or handheld Cutting machine and so on. The use of ultrasonic cutting machines can also be extended, such as digging holes, shovel digging, scraping paint, engraving, slitting and so on.