20Khz High Speed Ultrasonic Cutting And Sealing Equipment For Plastic Clamp On Blade
20Khz high speedUltrasonic Cutting And Sealing Equipment for plastic with clamp on blade
Compare to traditional lacer cutting for cashmere fabric, Ultrasonic cutting of cashmere fabric material without smoke, also not yellowing of the material due to high temperature of lacer cutting, especially for light-colored materials.
Ultrasonic Cutting Machine is a class of device using ultrasonic energy for cutting. Instead of using traditional blade cutting, ultrasonic cutting has its advantages of smooth, reliable cutting, accurate trimming, no deformation, no raising, fuzzing, spinning, wrinkling etc. It can avoid the rough cutting-edge, coked edge, fuzzballs and other shortcomings of laser cutting machine.
Ultrasonic cutting machine is used for cutting rubber, synthetic fabric, cloth, plastic, sheet metal, food etc.
The cutting of food products using ultrasound is performed when an ultrasonic blade comes into contact with the product to be cut, the high vibration of 40,000 pulses per second, makes this product very easily be cut even if it is of delicate or sticky texture composition. The much higher vibration does not allow any product to stick to the blade. The cut is clean and without pressure on the product.
Ultrasonic Slitting/Sealing, 40Khz Ultrasonic Cutting and Sealing Equipment for Processing and Trimming the Edge of the Blanket, Ultrasonic slitters cleanly cut and seat the edges of synthetic or blended fabrics, eliminating the disadvantages of hot wire or rotating knives, Fraying, unraveling, or beading along the cut edge are eliminated.
Slitters may be mounted on a loom to cut the non-selvedge edge of woven fabric. Equipment is available to operate at the slow speed of weaving looms without burning or beading me fabrics. With special framework and motor frive, crosscuts can be made on the loom.
Environment-friendly (No noise, no smoke, no air contamination)
Smooth cutting of difficult-to-cut materials
Small hand-held size(can be attached to automotive machinery arms)
No special installation equipment
High-power ultrasonic cutter with maximum power output of 300W is compatible with materials needing high-power cutting
Takes carbide and large blades
Mountable on automated machinery and industrial robots
Max. power output
Outer dimension (mm)
Change of output
Ultrasonic cutting sewing equipment is mainly suitable for fabric, suitable materials such as cashmere fabric,felt fabric,butyrate, cellulose, nylon, polyester, polyethylene, polyethylene, polypropylene, PVC and other materials. It is also suitable for a wide range of tubing in automotive, metal, pharmaceutial, food, cosmetic, medical and scientific applications.
Easy to use and operation
Small volume , take small space
Cut the fabric and seal the edge in a professional way