Flux Free Ultrasonic Soldering Equipment Dipping Type With Clean Surface

Ultrasonic Soldering Machine ( Dip Soldering Type ) offers highly solid and reliable soldering joints without flux.

The Solbraze Ultrasonic Soldering System makes possible the dip tinning of a wide range of both metallic and non-metallic materials without the use of any flux.

The ultrasonic soldering system consists of two main components; an ultrasonic probe and a generator. The design of the probe is such that it will resonate at a set ultrasonic frequency of around 20kHz which is transmitted to the solder bath via a transducer and ultrasonic probe, or sometimes referred to as an energy horn. This horn or probe enters through the side of the solder bath and is partially immersed in the solder. The generator will automatically adjust its output frequency to match the exact resonant frequency of the probe assembly. The generator also controls the amplitude of the ultrasonic vibration, and will give a maximum power output of 250W.

The system is usually used with a solder bath which has an element rating of 700W and a capacity of approx. 10 kgs. There is a solder temperature light on the front of the generator which is not in use during operation without a solder bath.

It is essential that the ultrasonic transducer remains cool, and because of this the transducer housing is fitted with a fan, and compressed air is supplied to the cooling collar on the probe. If the supplied system is used with small components heated by hot air, it is likely that the compressed air cooling will not be required.

Application

• Electronic Components Soldering (No Flux)
• Magnet Wire (Al or Cu) Product Soldering Motor / Transformer / Inductor / Toroidal Coil
• Soldering (No Flux)
• Battery Electrode Soldering
• Hard-to-solder material soldering (Aluminum, Nickel, Molybdenum, Glass, Ceramic, Nonferrous metals)

Description

Benefits and Applications

Ultrasonic energy introduced into a dip solder pot eliminates the need for flux while enhancing many soldering processes. It also provides a means to bond solder to a number of materials including aluminum and glass that are difficult or impossible to solder using conventional soldering techniques. RPS-sonic has perfected a technique for introducing ultrasonic energy into dip solder pots and is the exclusive manufacturer of this type of equipment in the world today.

RPS-SONIC' solder pots are activated by externally mounted transducers which allow large volume multi-part dipping. The systems' controls are adaptable to automated lines.

Electronic Component Tinning and Soldering

Component lead solderability is a major consideration when devices are to be incorporated into high reliability hardware such as that used by the military, human implants including pacemakers and defibrillators, and for aerospace applications. This is especially true in cases where the device, once installed, is not accessible for service. In these critical applications it is commonplace to "tin" component leads when they arrive at the assembly house and prior to going into storage. In some cases the component leads may again be "tinned" immediately prior to use. Ultrasonic tinning offers several advantages over conventional flux methods for high reliability lead tinning.

Ultrasonic solder is your best choice for flux free, high quality ultrasonic soldering.
In the past, flux and heating were the typical methods to be used for soldering, but Sunbonder introduces a new type of soldering, based on heat and ultrasonic vibrations. Combination of flux and heating is the typical part of the standard soldering process. Flux as a strong chemical agent for cleaning soldered surfaces generates harmful fumes and requires additional post-process of cleaning. Sunbonder introduces a new type of soldering , ultrasonic soldering, based on heat and ultrasonic vibrations.

Ultrasonic soldering method cleans the soldered surface mechanically by cavitation effect induced by ultrasonic vibrations. Ultrasonic soldering does not use flux, and thus generates no fumes and eliminates cleaning process or any environmental pollution.
By combining this device with Cerasolｚer, the customer can solder on glass, ceramics, aluminum, molybdenum etc., without using any organic substances.